1. Check the hydraulic oil in the pressure oil tank and the oil level in the oil injector to ensure sufficient supply of hydraulic oil and lubricating oil.
2. Connect the main power supply, turn on the main switch on the control box, and set the operation mode selection switch to jog or manual.
3. The machine should be started when there is no pressure in the hydraulic system, and the hydraulic system pressure should be adjusted to normal pressure after starting.
After the hydraulic pump starts working, open the cooling water valve of the oil cooler to cool the return oil and prevent excessive oil temperature.
After the hydraulic pump works for a short period of time, close the safety door and manually close the mold, and open the pressure gauge to observe whether the pressure rises.
6. When the vehicle is empty, manually operate the machine to run it several times and observe whether the safety door, indicator lights, and various valves are operating correctly and sensitively.
7. Check if the relay, limit switch, counting device, and main stop button are working properly, reliably, and sensitively.
8. Conduct semi-automatic and automatic operation tests to check if the operation is normal.
